-
Quick Facts
- Girard water heater part number: 2GWHAM
- 42,000 BTUs provide optimal performance for RV plumbing
- 12V power that operates at less than 3 amps
- Equipped with quiet, brushless motor
- Onboard microprocessor monitors inlet water flow, inlet and outlet temperature
- Microprocessor regulates the burner to maintain set hot water temperature
- Comes with a digital user control panel
- Freeze protection enables reliable winter use
- No new LP gas lines or special plumbing required
- Compact design fits in any tank water heater cut-out opening
- Includes conversion door for the Atwood 10-gallon RV water heater
- Hinged door design and sliding latch for easy access
- Includes trim ring for a sleek and finished look around your water heater door
-
Specifications
-
What's Included
Girard Tankless RV Water Heater with Door Installation Kit and Trim Ring - 10-Gallon, Black
SKU #: 2022448509
$ 904.95
Take the comfort of home on the road with a Girard RV tankless water heater. Made specifically for RVs, this water heater keeps your hot water constant and consistent. This kit includes a water heater, trim ring and door.Â
-
Quick Facts
- Girard water heater part number: 2GWHAM
- 42,000 BTUs provide optimal performance for RV plumbing
- 12V power that operates at less than 3 amps
- Equipped with quiet, brushless motor
- Onboard microprocessor monitors inlet water flow, inlet and outlet temperature
- Microprocessor regulates the burner to maintain set hot water temperature
- Comes with a digital user control panel
- Freeze protection enables reliable winter use
- No new LP gas lines or special plumbing required
- Compact design fits in any tank water heater cut-out opening
- Includes conversion door for the Atwood 10-gallon RV water heater
- Hinged door design and sliding latch for easy access
- Includes trim ring for a sleek and finished look around your water heater door
-
Specifications
-
What's Included
Product description
Keep the Hot Water Flowing
The Girard tankless RV hot water heater is the result of many years of research and experience. It is easy to operate and provides endless water at the precise desired temperature. The onboard microprocessor monitors incoming cold water temperature, flow rate and outgoing hot water temperature to maintain a constant, steady hot water flow. With an ultra-easy installation, this continuous hot water heater for RVs can fit into any tank water heater opening and won’t weigh down your rig with its surprisingly lightweight design. The water heater door is easy to open and close — no more twist latches! The hinged door and sliding latch allow fast, easy access to the water heater, and the silicone exhaust ring adjusts for easy alignment of the exhaust tube.
Intelligent User Display
The interior wall-mounted digital controller displays the operating functions and allows for temperature setting adjustments from 95 to 124°F. Parents will love the ability to pre-set the hot water to a lower temperature and not worry that the water may get too hot. The user display also features visual diagnostics that allow for easy troubleshooting.
Girard Tankless RV Water Heater with Door Installation Kit and Trim Ring Features
- POWERFUL PERFORMANCE — At 42,000 BTUs, this continuous hot water heater provides optimal performance for RV plumbing. The quiet, brushless motor runs on 12V power that operates at less than three amps for a nearly noiseless operation
- CONSISTENT TEMP — The onboard microprocessor monitors incoming cold water temperature, flow rate and outgoing hot water temperature to maintain a steady water flow. It also regulates the burner to maintain a consistent temperature, preventing cold spots and scalding water
- HIGHLY EFFICIENT — The Girard RV tankless water heater consumes half the LP gas that a six-gallon tank water heater would consume for the same amount of hot water
- INTELLIGENT CONTROL — With a digital user control panel, you can adjust the temperature setting from 95 to 124°F, toggle between Fahrenheit and Celsius, get a continuous water outlet temperature reading and more. For easy troubleshooting, the control panel also displays error codes if issues arise
- EASY INSTALLATION — With the lightweight and compact design, the Girard hot water heater fits in any tank water heater cut-out opening. Additionally, there is no need for bypass plumbing, no tank to drain and no anode rods to change
Warning: Cancer and reproductive harm. www.P65Warnings.ca.gov.